fs

type DirEntry ¶

type DirEntry interface {
	// Name returns the name of the file (or subdirectory) described by the entry.
	// This name is only the final element of the path (the base name), not the entire path.
	// For example, Name would return "hello.go" not "home/gopher/hello.go".
	Name() string

	// IsDir reports whether the entry describes a directory.
	IsDir() bool

	// Type returns the type bits for the entry.
	// The type bits are a subset of the usual FileMode bits, those returned by the FileMode.Type method.
	Type() FileMode

	// Info returns the FileInfo for the file or subdirectory described by the entry.
	// The returned FileInfo may be from the time of the original directory read
	// or from the time of the call to Info. If the file has been removed or renamed
	// since the directory read, Info may return an error satisfying errors.Is(err, ErrNotExist).
	// If the entry denotes a symbolic link, Info reports the information about the link itself,
	// not the link's target.
	Info() (FileInfo, error)
}

A DirEntry is an entry read from a directory (using the ReadDir function or a ReadDirFile's ReadDir method).

func FileInfoToDirEntry(info FileInfo) DirEntry

func ReadDir(fsys FS, name string) ([]DirEntry, error)

type FS ¶

type FS interface {
	// Open opens the named file.
	//
	// When Open returns an error, it should be of type *PathError
	// with the Op field set to "open", the Path field set to name,
	// and the Err field describing the problem.
	//
	// Open should reject attempts to open names that do not satisfy
	// ValidPath(name), returning a *PathError with Err set to
	// ErrInvalid or ErrNotExist.
	Open(name string) (File, error)
}

An FS provides access to a hierarchical file system.

The FS interface is the minimum implementation required of the file system. A file system may implement additional interfaces, such as ReadFileFS, to provide additional or optimized functionality.

func Sub(fsys FS, dir string) (FS, error)

type File ¶

type File interface {
	Stat() (FileInfo, error)
	Read([]byte) (int, error)
	Close() error
}

A File provides access to a single file. The File interface is the minimum implementation required of the file. Directory files should also implement ReadDirFile. A file may implement io.ReaderAt or io.Seeker as optimizations.

type FileInfo ¶

type FileInfo interface {
	Name() string       // base name of the file
	Size() int64        // length in bytes for regular files; system-dependent for others
	Mode() FileMode     // file mode bits
	ModTime() time.Time // modification time
	IsDir() bool        // abbreviation for Mode().IsDir()
	Sys() any           // underlying data source (can return nil)
}

A FileInfo describes a file and is returned by Stat.

func Stat(fsys FS, name string) (FileInfo, error)

type FileMode ¶

type FileMode uint32

A FileMode represents a file's mode and permission bits. The bits have the same definition on all systems, so that information about files can be moved from one system to another portably. Not all bits apply to all systems. The only required bit is ModeDir for directories.

const (
	// The single letters are the abbreviations
	// used by the String method's formatting.
	ModeDir        FileMode = 1 << (32 - 1 - iota) // d: is a directory
	ModeAppend                                     // a: append-only
	ModeExclusive                                  // l: exclusive use
	ModeTemporary                                  // T: temporary file; Plan 9 only
	ModeSymlink                                    // L: symbolic link
	ModeDevice                                     // D: device file
	ModeNamedPipe                                  // p: named pipe (FIFO)
	ModeSocket                                     // S: Unix domain socket
	ModeSetuid                                     // u: setuid
	ModeSetgid                                     // g: setgid
	ModeCharDevice                                 // c: Unix character device, when ModeDevice is set
	ModeSticky                                     // t: sticky
	ModeIrregular                                  // ?: non-regular file; nothing else is known about this file

	// Mask for the type bits. For regular files, none will be set.
	ModeType = ModeDir | ModeSymlink | ModeNamedPipe | ModeSocket | ModeDevice | ModeCharDevice | ModeIrregular

	ModePerm FileMode = 0777 // Unix permission bits
)

func (m FileMode) IsDir() bool

func (m FileMode) IsRegular() bool

func (m FileMode) Perm() FileMode

func (m FileMode) String() string

func (m FileMode) Type() FileMode

type GlobFS ¶

type GlobFS interface {
	FS

	// Glob returns the names of all files matching pattern,
	// providing an implementation of the top-level
	// Glob function.
	Glob(pattern string) ([]string, error)
}

A GlobFS is a file system with a Glob method.

type PathError ¶

type PathError struct {
	Op   string
	Path string
	Err  error
}

PathError records an error and the operation and file path that caused it.

func (e *PathError) Error() string

func (e *PathError) Timeout() bool

func (e *PathError) Unwrap() error

type ReadDirFS ¶

type ReadDirFS interface {
	FS

	// ReadDir reads the named directory
	// and returns a list of directory entries sorted by filename.
	ReadDir(name string) ([]DirEntry, error)
}

ReadDirFS is the interface implemented by a file system that provides an optimized implementation of ReadDir.

type ReadDirFile ¶

type ReadDirFile interface {
	File

	// ReadDir reads the contents of the directory and returns
	// a slice of up to n DirEntry values in directory order.
	// Subsequent calls on the same file will yield further DirEntry values.
	//
	// If n > 0, ReadDir returns at most n DirEntry structures.
	// In this case, if ReadDir returns an empty slice, it will return
	// a non-nil error explaining why.
	// At the end of a directory, the error is io.EOF.
	//
	// If n <= 0, ReadDir returns all the DirEntry values from the directory
	// in a single slice. In this case, if ReadDir succeeds (reads all the way
	// to the end of the directory), it returns the slice and a nil error.
	// If it encounters an error before the end of the directory,
	// ReadDir returns the DirEntry list read until that point and a non-nil error.
	ReadDir(n int) ([]DirEntry, error)
}

A ReadDirFile is a directory file whose entries can be read with the ReadDir method. Every directory file should implement this interface. (It is permissible for any file to implement this interface, but if so ReadDir should return an error for non-directories.)

type ReadFileFS ¶

type ReadFileFS interface {
	FS

	// ReadFile reads the named file and returns its contents.
	// A successful call returns a nil error, not io.EOF.
	// (Because ReadFile reads the whole file, the expected EOF
	// from the final Read is not treated as an error to be reported.)
	//
	// The caller is permitted to modify the returned byte slice.
	// This method should return a copy of the underlying data.
	ReadFile(name string) ([]byte, error)
}

ReadFileFS is the interface implemented by a file system that provides an optimized implementation of ReadFile.

type StatFS ¶

type StatFS interface {
	FS

	// Stat returns a FileInfo describing the file.
	// If there is an error, it should be of type *PathError.
	Stat(name string) (FileInfo, error)
}

A StatFS is a file system with a Stat method.

type SubFS ¶

type SubFS interface {
	FS

	// Sub returns an FS corresponding to the subtree rooted at dir.
	Sub(dir string) (FS, error)
}

A SubFS is a file system with a Sub method.

type WalkDirFunc ¶

type WalkDirFunc func(path string, d DirEntry, err error) error

WalkDirFunc is the type of the function called by WalkDir to visit each file or directory.

The path argument contains the argument to WalkDir as a prefix. That is, if WalkDir is called with root argument "dir" and finds a file named "a" in that directory, the walk function will be called with argument "dir/a".

The d argument is the fs.DirEntry for the named path.

The error result returned by the function controls how WalkDir continues. If the function returns the special value SkipDir, WalkDir skips the current directory (path if d.IsDir() is true, otherwise path's parent directory). Otherwise, if the function returns a non-nil error, WalkDir stops entirely and returns that error.

The err argument reports an error related to path, signaling that WalkDir will not walk into that directory. The function can decide how to handle that error; as described earlier, returning the error will cause WalkDir to stop walking the entire tree.

WalkDir calls the function with a non-nil err argument in two cases.

First, if the initial fs.Stat on the root directory fails, WalkDir calls the function with path set to root, d set to nil, and err set to the error from fs.Stat.

Second, if a directory's ReadDir method fails, WalkDir calls the function with path set to the directory's path, d set to an fs.DirEntry describing the directory, and err set to the error from ReadDir. In this second case, the function is called twice with the path of the directory: the first call is before the directory read is attempted and has err set to nil, giving the function a chance to return SkipDir and avoid the ReadDir entirely. The second call is after a failed ReadDir and reports the error from ReadDir. (If ReadDir succeeds, there is no second call.)

The differences between WalkDirFunc compared to filepath.WalkFunc are:

• The second argument has type fs.DirEntry instead of fs.FileInfo.
• The function is called before reading a directory, to allow SkipDir to bypass the directory read entirely.
• If a directory read fails, the function is called a second time for that directory to report the error.